Name Group and add all Interfaces that you want isolated. Interfaces>Assignments>Interface Groups>Add.VLAN Priority Default value of 0 is fine. VLAN Tag This is the VLAN-ID that needs to match the existing VLAN ID configuration for the VMware Port Gorups. As per example in this homelab this is the LAN interface identified from pfSense as vmx1. vlan 2 on the switch is this untagged vlan. interface gigabitethernet5 description 'sg4860 WLan and vlans' switchport trunk allowed vlan add 3 - 4, 6 - 7, 19 switchport trunk native vlan 2. Inter-VLAN routing will allow the VLAN10 and VLAN20 networks to. PFManagmentAccess: list of all IPs/LANs that should have access to the pfSense (replace X and Y with your subnet) But here is my config on sg300 for the port connected to pfsense that has native network setup and then vlans on top of that. edgerouter X SFP network router pdf manual.LAN Interfaces can have default allow rule. Create a Interface Group rules that allows LANs/Devices to talk to pfSense for DNS (if needed), blocks all other traffic to pfSense, blocks traffice to RFC1918 addresses (via Alias). Create a Floating rule to allow pfSense access to the LANs/Devices that should be allowed to access the pfSense web interface. For example, an environment where you host servers for different clients The Theoryįirewall rules are process in this order: Floating>Interface Group>Interface.

Also, need to block many vLANs from being able to access the pfSense web interface. Im using a Cisco SG300-52 as my Core switch. Then the pfSense box will have an interface on every VLAN that you can apply firewall rules to, give out DHCP, etc. Then you will add all of the VLANs to pfSense using that parent physical interface. Changing the VLAN on the ports for one of the devices brings the connection speed back up to about 950 Mb/s. You will basically have a Cisco Trunk (802.1q tagged) link going to the interface on the pfSense machine. One pfSense with multiple vLANs that need to be locked down or isolated from each other. Im am working on creating a separate subnet for server and clients however the connection speed between clients on different VLANs is about 18 Mb/s.

Pfsense inter vlan routing